LoRa™ MODULES

XTR-8LR100

Half-Duplex transceiver for long distance communication with LoRa™ modulation, able to ensure high immunity level against the interferences and a reduced energy consumption.

Working into European bandwidth 869.4 ÷ 869.65 MHz (100mW) and 868.0 ÷ 868,6 MHz (25mW) with link budget > 156 dBm.

XTR-8LR100 is a radio modem with UART interface with an implemented data packet addressing technique that allows a point-multipoint communication and 248 byte of max. payload.

new2 XTR-8LR100 (650201364G) – Shortform – User Manual
Demoboard – DoC – Demo Software – Flying Time Calculation

Half-duplex transceiver for long distance communication with LoRa SSM modulation

  • Modulation: LoRa™
  • Supply: 3V
  • Frequency: 869.4 ÷ 869.6 MHz
  • Sensitivity: -118 to -145 dBm
  • RF output power: 100 mW (MAX)
  • Consumption: 110 mA (TX)
  • Consumption (RX): 17 mA
  • Consumption (standby): 1 µA
  • Dimension: 37 x 18 x 2.4 mm

 

XTR-8LR10

Half-Duplex transceiver for long distance communication with LoRa™ modulation, able to ensure high immunity level against the interferences and a reduced energy consumption.

Working into European bandwidth 869.4 ÷ 869.65 MHz and 868.0 ÷ 868.6 MHz with a link budget > 150 dBm.

XTR-8LR10 is a radio modem with UART interface with an implemented data packet addressing technique that allows a point-multipoint communication and 248 byte of max. payload.

new2 XTR-8LR10 (650201415G) – Shortform – User ManualDemoboard

xtr-8lr10

  • Modulation: LoRa™
  • Supply: 3V
  • Frequency: 868 ÷ 870 MHz
  • Sensitivity: -115 to -137 dBm
  • Output power: 25 mW
  • Consumption: 30 mA (TX) @ 14 dBm
  • Consumption (RX):17 mA
  • Consumption (standby): 1 µA
  • Dimension: 33.5 x 15.4 x 2.4 mm

 

XTR-8LR-USB

Half duplex transceiver based on LoRa™ modulation technique providing an ultra long range radio communication, high interference immunity, high sensitivity and very low power consumption.

XTR-8LR-USB is a radio-modem with Usb interface, used as receiver or concentrator for data from XTR-8LR10 and XTR-8LR100 modules.

It can handle addressing data for point-to-multipoint or star networks, main radio parameters might be set up smoothly via command mode procedure, offering the user a variety of solutions and flexibility to the problems encountered in the field.

new2 XTR-8LR-USB (650201428G) – Shortform

XTR-8LR-USB

  • Modulation: LoRa™
  • Supply: 5V by USB
  • Frequency: 869.4 ÷ 869.6 MHz
  • Sensitivity: -118 to -145 dBm
  • Output power: 100 mW (ERP)
  • Consumption: 135 mA (TX)
  • Consumption (RX):20 mA
  • Dimension: 69 x 25 x 16 mm

 

XTR-8LR-4ZN

Half duplex transmitter based on LoRa™ modulation technique providing an ultra long range radio communication, high interference immunity, high sensitivity and very low power consumption.

XTR-8LR-4ZN is a keyfob with encrypted communication that combined with the XTR-8LR-DEC is used to activate remote loads, offering the user a variety of solutions and flexibility to the problems encountered in the field. Two-way communication allows to know the state of the activated output.

Compatible only with XTR-8LR-DEC (650201431G)

new2 XTR-8LR-4ZN (650201429G) – Shortform

XTR-8LR-4ZN

  • Modulation: LoRa™
  • Supply: 3V (CR2032 Lithium)
  • Frequency: 868.30 MHz
  • Sensitivity: -122 dBm
  • Output power: 10 mW (ERP)
  • Consumption: 35 mA
  • Dimension: 72 x 39 x 11 mm

 

XTR-8LR-ENC

Half duplex transceiver based on LoRa™ modulation technique providing an ultra long range radio communication, high interference immunity, high sensitivity and very low power consumption.

XTR-8LR-ENC is a transmitter with encrypted communication that combined with the XTR-8LR-DEC is used to activate remote loads, offering the user a variety of solutions and flexibility to the problems encountered in the field. Two-way communication allows to know the state of the activated output.

Compatible only with XTR-8LR-DEC (650201431G)

new2 XTR-8LR-ENC (650201430G) – Shortform

XTR-8LR-ENC

  • Modulation: LoRa™
  • Supply: 3V
  • Frequency: 868.30 MHz
  • Sensitivity: -122 dBm
  • Output power: 20 mW (ERP)
  • Consumption: 35 mA (TX)
  • Consumption: < 1µA (PWDN)
  • Dimension: 35.5 x 18 x 2.3 mm

 

XTR-8LR-DEC

Half duplex receiver based on LoRa™ modulation technique providing an ultra long range radio communication, high interference immunity, high sensitivity and very low power consumption.

XTR-8LR-DEC is a receiver with encrypted communication that combined with the XTR-8LR-ENC or with keyfob XTR-8LR-4ZN is used to activate remote loads, offering the user a variety of solutions and flexibility to the problems encountered in the field.

The module makes available four open-collector outputs and two lines of setting the output functioning mode, the cyclical receiver mode also allows a consumption < 1 mA, allowing use in battery powered applications. The output state will be acknoleged to its transmitter.

Compatible only with XTR-8LR-ENC (650201430G) and XTR-8LR-4ZN (650201429G)

new2 XTR-8LR-DEC (650201431G) – Shortform

XTR-8LR-DEC

  • Modulation: LoRa™
  • Supply: 3V
  • Frequency: 868.30 MHz
  • Sensitivity: -126 dBm
  • Output power: 20 mW (ERP)
  • Consumption: 16 mA (RX)
  • Consumption: 35 mA (TX)
  • Consumption: < 1 mA (RX IDLE)
  • Dimension: 38.5 x 16 x 3.8 mm

 

XTR-8LRWAN

Half duplex transceiver based on LoRa™ modulation technique providing an ultra long range radio communication, high interference immunity, high sensitivity and very low power consumption.

XTR-8LRWAN is designed to support LORAWAN™ protocol stack to provide Low Power Wide Area Network with features specifically needed to support low-cost, mobile, secure bi-directional communication for Internet of Things (IoT), machine-to-machine (M2M), smart city and industrial applications.

new2 XTR-8LRWAN (650201432G) – Shortform

XTR-8LRWAN

  • Modulation: LoRa™
  • Supply: 3V
  • Frequency: 863 ÷ 870 MHz
  • Sensitivity: -120 to -137 dBm
  • Output power: 100 mW (MAX)
  • Consumption: 11 mA (RX)
  • Consumption: 120 mA MAX (TX)
  • Dimension: 37 x 18 x 2.4 mm

 

XTR-8LR-DEMO

DEMO-BOARD XTR-8LR100 and DEMO-BOARD XTR-8LR10 is an evaluation board of the transceiver module XTR-8LR100 and module XTR-8LR10 which can easily check functionality, power consumption, commands and performance of radio link.

The difference between the two demo board is on the mounted module, XTR-8LR100 that have mode of operation, Normal, Rx ciclyc, Tx ADC value and XTR-8LR10 that is implemented the Normal mode operation.

For more detail about the operation mode refer to the user manual of the used module. The device is able to work with external power supply or powered by four AA batteries, for tests in standalone.

It is included a stylus antenna operating on the 868 MHz band connected to the SMA connector, thereby using the test mode through some diagnostic led, it is possible to realize radio links.

The DEMO-BOARD is equipped with a USB connector with COM port emulation realized with CI FTDI1235-C and an SMA input connector radio output for the RF connections measurement instruments.

new2 DEMO XTR-8LR100 (650201374G) – User Manual
new2 DEMO XTR-8LR10 (650201392G) – User Manual

XTR-8LR-DEMO

  • Modulation: LoRa™
  • Supply: 6V (4 x 1.5V) AA Alkaline or Ext. DC supply
  • Frequency: 868 ÷ 870 MHz
  • Sensitivity: -115 to -145 dBm
  • Output power (ERP): 100 mW (DEMO XTR-8LR100)
  • Output power (ERP): 25 mW (DEMO XTR-8LR10)
  • Consumption: 24 mA (RX)
  • Consumption: 125 mA (TX)
  • Dimension: 90 x 70 x 33 mm

Download Wireless Catalog 2017

Download Catalog (PDF)

For complete list of AUREL documentation, please visit our download area

Request information

Please provide us all the details you can to get the most accurate response as quickly as possible. Fields marked with * are required.

First name *

Last name *

Email *

Phone *

Products

Message *

Sales Network

Rete ditribuzione Italia AUREL cannot directly support "not professional" users (hobbysts). AUREL promote their products also by sales network.